
PREPARATION
Check thermostat and wallplate suitability for your heating or heating/cooling system. Refer to Table 1,
THERMOSTAT
MODEL
SUBBASE OR
WALLPLATE INCLUDED
FOR USE WITH
CT1500 199986C Wallplate
2-wire, 15 to 30 volt control circuit. For gas or oil
heating system.
CT1501 Q682A1079 Subbase
4- or 5-wire, 16 to 30 volt control circuit. For gas or
oil heating/cooling system.
CT1502
Q682B1227 Subbase
4-wire, 15 to 30 volt control circuit. For single stage
heat pump or central electric heating/cooling
systems that require the thermostat to control the
fan in heating.
CT1503 199986D Wallplate
750 millivolt single-stage heating system.
3 Thermostat must be mounted on wallplate or subbase included in package to assure operation.
□
Assemble tools required, as illustrated
WJRE CUTTER/STRIPPER OR SHARP KNIFE
IF NEEDED TO STRIP WIRES
0=0^
HE a
SPIRIT LEVEUTO I.EVEC THERMOSTAT
FOR. ACCURATE OPERATION
69-0273—9
Comentarios a estos manuales