Honeywell MAGICSTAT 3355 Manual de usuario descargar pdf (Pagina 19)

69-1012

First, turn in both screws completely, then

adjust for system type:

• Warm Air Furnace—Set at the Hot Water

setting (A—out one turn, B—leave in).

• Electric Furnace—Leave at the Warm Air

Furnace setting (A—leave in, B—leave in).

NOTE: This thermostat does not have a

setting for steam/gravity air. Cycles

would not be long enough for accu-

rate temperature control.

IMPORTANT

When using a high efficiency furnace

such as a 90% or greater AFUE

(Average Fuel Utilization Efficiency)

unit, adjust screw A out one turn and

leave screw B in.

■■ The thermostat is set to read the tempera-

ture in degrees Fahrenheit. If readings are

desired in degrees Celsius, adjust screw C

out one turn, as shown in illustration.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Sin comentarios

Honeywell MAGICSTAT 3355 Manual de usuario Pagina 19