Honeywell Dolphin 7600 Guía de usuario Pagina 126

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 144
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 125
12 - 2
Back Panel
Power Supply Connector
Attach the power supply to this connector. The universal power supply accepts input voltages
between 90-265 volts.
Power Switch
Toggle the power switch to turn the charger on and off.
Supplying Power
Use the power adapter cable that comes with the charger so that the input voltage is adjusted
appropriately.
1. Locate the AC power adapter cable and plug it into the power source.
2. Connect the power cable to the power adapter.
3. Connect the power cable to the power supply connector on the back of the charger.
4. Press the power switch to the ON position.
5. The device performs the following power-up diagnostic routine for each slot indicated by the Status
LEDs:
All ON Orange
delay (500ms)
All ON Red
delay (500ms)
All ON Green
delay (500ms)
All OFF
Power Supply Connector
Power Switch
Vista de pagina 125
1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 143 144

Comentarios a estos manuales

Sin comentarios