Honeywell EKZ008200B Manual de usuario descargar pdf (Pagina 12)

To adjust beep level :

• Press the total set arming key

• Press the 8 key

• Enter beep level from 1 to 7



A double beep on the keypad will confirm the change

To exit programming :

• Press the “off” key

WARNING: The system will automatically exit programming mode after 15 seconds if no keys

have been pressed and the red light will turn off. If this occurs you must restart this process

from the beginning.

- 11 -

Total set arming + CODE or TAG

Part set arming + CODE or TAG

Annex set arming + CODE or TAG

Disarming Enter CODE or present TAG

Disarming under duress Enter DURESS CODE = CODE + 1

Alert

Enter programming + + MASTER CODE OR MASTER TAG

Change user code User ID 0-9 + enter new CODE

+ enter new CODE again

Change user TAG User ID 0-9 + present new TAG

Change beep level + + enter beep level 1-7

Exit programming

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 96 97

Sin comentarios

Honeywell EKZ008200B Manual de usuario Pagina 12