Honeywell K14114 Manual de usuario descargar pdf (Pagina 33)

LYNXR-I Installation and Setup Guide

- 33 -

✻

56 Enhanced Zone Programming Mode

Id vi

Descriptor 1

Enter [#] + 2-digit vocabulary index number† of

first descriptor word for this zone.

6 = accept word and advance to descriptor 2

(descriptor 2 will be announced)

8 = accept word and advance to next zone

(prompt A) – entire zone descriptor will be

announced

Press any other key to repeat the selected word.

† see ✻84 Assign Zone Voice Descriptors section for vocabulary index

Use the [6] or [8] key to advance as described.

To change the entered index number before pressing [6] or [8], simply

press [#] + desired 2-digit vocabulary index number.

If descriptor 1 is not desired, enter [#] + 99 (blank), then press [8] to

return to zone number prompt.

IE vi

Descriptor 2

Enter [#] + 2-digit vocabulary index number† of

second descriptor word for this zone.

6 = accept word and advance to descriptor 3

(descriptor 3 will be announced)

8 = accept word and advance to next zone

(prompt A) – entire zone descriptor will be

announced

Press any other key to repeat the selected word.

† see ✻84 Assign Zone Voice Descriptors section for vocabulary index

Use the [6] or [8] key to advance as described.

To change the entered index number before pressing [6] or [8], simply

press [#] + desired 2-digit vocabulary index number.

If descriptor 2 is not desired, enter [#] + 99 (blank), then press [8] to

return to zone number prompt.

IF vi

Descriptor 3

Enter [#] + 2-digit vocabulary index number† of

third descriptor word for this zone.

6 or 8 = accept word and advance to next zone

(prompt A) – entire zone descriptor will

be announced

Press any other key to repeat the selected word.

† see ✻84 Assign Zone Voice Descriptors section for vocabulary index

Use the [6] or [8] key to advance as described.

To change the entered index number before pressing [6] or [8], simply

press [#] + desired 2-digit vocabulary index number.

If descriptor 3 is not desired, enter [#] + 99 (blank), then press [8] to

return to zone number prompt.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 71 72

Comentarios a estos manuales

Sin comentarios

Honeywell K14114 Manual de usuario Pagina 33

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Honeywell K14114