Honeywell LYNXR-2 Manual de usuario descargar pdf (Pagina 49)

– 49 –

SUMMARY

SUMMARY SUMMARY

SUMMARY O

OF AUDIBLE N

F AUDIBLE NF AUDIBLE N

F AUDIBLE NOTIFICATION

OTIFICATIONOTIFICATION

OTIFICATION

Additional Announcements:

Pressing STATUS key once will announce the following primary messages, depending on

the system’s status at the time:

Disarmed–Ready to Arm [check system]

Disarmed [not ready to arm]

Armed [away] [stay] [instant] [check system] [exit now]

Pressing the STATUS key twice will announce the following secondary messages, depending

on the system’s status at the time:

Fire Alarm + zone voice descriptor

Alarm + zone voice descriptor

Carbon Monoxide Alarm + zone voice descriptor

Carbon Monoxide Fault + zone voice descriptor

Fire Fault + zone voice descriptor

Fault + zone voice descriptor Alarm + zone voice descriptor

Low Battery + zone voice descriptor Fire Fault + zone voice descriptor

System Low Battery

Check System

AC Loss

Zones Bypassed

Chime

NOTE: If there are no secondary messages, the primary status messages will be announced.

LED Meanings

ARMED LED: ON = System armed

(Red) OFF = System disarmed

Blinking = System armed, but a fault exists or once per second when AVM (VOX or

Talk) or speaker phone mode is active.

READY LED: ON = System disarmed, ready to arm

(Green) Blinking = System disarmed, not ready to arm (a fault exists) or once per second when

AVM (VOX or Talk) or speakerphone mode is active.

NOTE: When the system is armed, the READY LED turns off.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 63 64

Sin comentarios

Honeywell LYNXR-2 Manual de usuario Pagina 49