Honeywell HEGS5001 Manual de usuario Pagina 35

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 34
5.2.2 Program PreShot
There are two methods for programming and saving PreShots. The first method quickly
saves the current camera scene and assigns a predefined title. For example, PreShot 1
is titled PS1, PreShot 2 is titled PS2, etc. The second method allows the user to
program a 24-character title.
Note: Operators may program PreShots 0-10. To program PreShots 11-98, you must
log in as a Master user.
Program PreShot Method 1 (Default title)
1. Position the camera (pan, tilt) and the lens (zoom, focus, iris) to the desired scene.
2. Press the Run Menu (
Run
1. ___
3. ___
) key until Quick Prg Preset is displayed on the LCD then
press Enter (
).
3. Enter the desired PreShot # (0-99) and Press Enter (
). The current PTZ position
and lens setting are saved for the PreShot # entered.
Example: To save PreShot 5 with default title PS5.
1. Position the camera and lens.
2. Press the Run Menu (
Run
1. ___
3. ___
) key until Quick Prg Preset is displayed.
3. Press the Enter (
) key.
4. Press the 5 key.
4. Press the Enter (
) key.
The current KD6/HD6 scene is saved as PreShot 5 with title PS5.
Program PreShot Method 2 (User-defined Title)
1. Press the Dome Menu (
1. ___
3. ___
) key.
2. Press the + or – key until PreShot Menu is displayed.
3. Press the Enter ( ) key.
5. Press the + or – key until Program is displayed.
Rev. 1.01 25 900.0800
19-Jun-06
Vista de pagina 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

Comentarios a estos manuales

Sin comentarios