Honeywell HEGS5001 Manual de usuario Pagina 44

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 43
5.2.11 Delete a Tour
1. Press the Dome Menu (
1. ___
3. ___
) key.
2. Press + or – until Tour Menu is displayed.
3. Press Enter (
).
4. Press + or – until Delete is displayed.
5. Press Enter (
).
6. Enter the desired tour # (1-3) using the numeric keys.
7. Press Enter (
).
5.2.12 Programming Sector IDs
Sector IDs are used for labeling specific areas that the PTZ camera views. Whenever a
PTZ camera is under manual control and it is viewing a programmed sector, the name
given that sector is added to the video signal.
Note: The camera ID display must be enabled. When an operator is viewing the monitor
or a video recorder is recording a specific dome, this labeling provides a quick
reference for the area being displayed. Up to 16 Sector IDs can be programmed
for each Scan Unit.
1. Press the Dome Menu (
1. ___
3. ___
) key.
2. Press + or - until Sector/Priv Menu is displayed.
3. Press Enter (
).
4. Press + or – until Program is displayed.
5. Press Enter ( ).
6. Enter the desired sector number (0-15) to program.
7. Press Enter (
).
Rev. 1.01 34 900.0800
19-Jun-06
Vista de pagina 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 67 68

Comentarios a estos manuales

Sin comentarios