Honeywell WT6500 Manual de usuario descargar pdf (Pagina 23)

SMARTBOX™ Controller for HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev14

SMARTBOX Installation

Battery Over-current Protection

TheNEC/CECrequiresthebatterycircuittobeprotectedwithadeviceratedfor125%

of the rating of the circuit. The DC-rated fuse or circuit breaker between the battery

and the SMARTBOX™ Controller must have a maximum size of 75A (the maximum

current rating of the SMARTBOX™ Controller).

SHOCK OR FIRE HAZARD

Over-current protection must be installed to protect the

SMARTBOX™ Controller from short circuits and to provide

a means of disconnecting it. Failure to follow this warning

may result in death, personal injury or property damage.

REVERSE POLARITY DAMAGE

BeforemakingthenalDCconnectionorclosingtheDC

breaker or disconnect, check cable polarity at both the

battery and the SMARTBOX™ Controller. Positive (+)

must be connected to positive (+). Negative(-) must be

connected to negative (-). Failure to follow this warning may

result in death, personal injury or property damage.

TURBINE SMARTBOX™ Controller

12V

OPTIONAL

(2) #4 THWN-2 + #4 GND

1” CONDUIT

MAX DISTANCE 6 FEET.

Figure 2.8 Battery Circuit Diagram

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 45 46

Sin comentarios

Honeywell WT6500 Manual de usuario Pagina 23