Honeywell Scanner MS9520 Manual de usuario Pagina 105
- Pagina / 116
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
22–3
³ 1 2 0 3 1 3
Detect and Notify Mode (Monitor the External
Trigger) – The external I/O pin used in the default
activation mode is monitored during the inactive
laser cycles. An <SI> is transmitted when the I/O
is active and an <SO> when it is inactive. Once
the scanning activation cycle is started, the
external I/O monitoring status is maintained until
the scanning cycle is terminated regardless of the
actual I/O level.
Continuous Blinky Mode
³ 4 1 8 3 3 4
Continuous Blinky Mode – The scanner will
continuously blink on and off,
turning the scanning
cycle on and off for all normal scanner operations.
If a bar code is scanned and transmitted, the same
symbol timeout is maintained throughout the cycle
preventing additional scans of the same bar code
when the scanner is in default mode.
Sleep Mode
³ 9 1 9 5 0 0
~ Sleep Mode – A power saving mode that can
be configured to occur in 1-second increments.
Use this code with a code byte sequence
(on page 16–
1) that represents the desired
increment.
- MetroSelect 1
- Disclaimer 2
- Trademarks 2
- Table of Contents 3
- Prefixes/Suffixes 4
- Code Formatting 4
- Introduction 7
- Need To Start Over? 8
- Code Types and Decode Rules 9
- Code 128 10
- Code 39 10
- ³ 1 0 0 2 0 5 11
- ³ 1 0 0 7 1 2 11
- ³ 1 0 7 7 0 5 11
- 2 OF 5 CODES 12
- ³ 1 0 0 1 1 0 13
- ³ 1 0 0 5 0 7 13
- Codabar 14
- Code 93 14
- Code 11 14
- Telepen 15
- Plessey Codes 15
- Additional Decode Features 16
- Configurable Code Lengths 17
- ³ 9 0 2 6 0 0 18
- ³ 9 0 3 2 0 0 18
- Supplements 19
- ³ 1 0 1 4 0 3 20
- ³ 1 0 1 2 0 5 20
- ³ 1 0 1 0 0 1 21
- ³ 1 0 1 3 1 5 22
- ³ 1 2 5 1 1 5 22
- ³ 1 0 1 2 1 0 23
- ³ 1 0 1 2 0 0 23
- ³ 1 2 5 0 1 7 23
- ³ 1 2 5 0 0 7 23
- GS1 DataBar 25
- GS1 DataBar Limited 26
- GS1 DataBar Expanded 26
- ISBT Code 128 Implementation 27
- ³ 3 0 1 3 6 0 28
- ³ 1 3 8 4 0 3 28
- ³ 4 3 8 4 1 2 0 29
- ³ 4 3 8 4 1 3 0 29
- ³ 4 3 8 4 1 4 0 29
- ³ 9 3 8 1 0 0 29
- ³ 9 3 8 3 0 0 29
- Communications 31
- Scanner Operation 33
- Redundant Scans 34
- Same Symbol Time Outs 35
- LED Options 35
- Beeper Options 36
- ³ 1 1 6 9 1 3 37
- ³ 1 2 5 0 1 0 37
- Data Transmission Delays 38
- ³ 1 1 8 4 1 2 39
- ³ 8 1 9 1 2 0 0 39
- Host Scanner Commands 40
- ³ 1 1 5 9 0 6 41
- ³ 1 1 8 2 1 3 41
- Test Modes 42
- ³ 1 0 5 5 0 7 44
- ³ 9 0 6 1 0 0 44
- ³ 9 0 6 5 0 0 45
- ³ 1 2 4 7 1 6 45
- Standard Prefix Characters 46
- ³ 1 0 5 5 1 1 47
- ³ 1 1 6 1 1 1 47
- Standard Suffix Characters 48
- Block Check Character 49
- Character Replacements 50
- ³ 9 0 4 9 0 0 51
- ³ 9 9 9 9 8 4 51
- Special Formats 52
- ³ 1 0 7 5 0 2 54
- ³ 1 0 7 6 0 0 54
- Codabar Formatting 55
- Code 39 Formatting 56
- Code 11 Formatting 56
- Plessey 57
- 2 of 5 Code Formatting 57
- Parity Features 59
- Baud Rate 59
- Data/Stop Bits 60
- Hardware Handshaking 60
- ³ 1 1 5 8 0 5 61
- ³ 1 2 4 5 0 2 61
- ³ 1 2 4 5 1 3 61
- ³ 1 1 5 8 0 7 61
- Software Handshaking 62
- Miscellaneous 63
- Keyboard 65
- Keyboard/System Type 66
- ‘Dumb’ Terminal Selections 67
- Special Keyboard Features 68
- ³ 1 1 6 2 1 4 69
- ³ 1 1 6 3 1 6 69
- ³ 1 1 6 3 0 6 69
- ³ 1 1 6 4 0 0 69
- ³ 1 1 6 3 0 4 69
- InterScan Code Delays 70
- Control Sets 71
- ³ 9 9 9 9 9 3 73
- Light Pen Parameters 75
- Set Narrow Element Width 76
- 46xx Configuration 77
- ³ 9 9 9 9 7 8 79
- ³ 9 9 9 9 7 2 80
- Code Bytes Usage 81
- Reserved Codes 82
- Code Type Table 82
- ASCII Reference Table 83
- MS9520 Voyager 89
- MS9540 VoyagerCG 89
- Series 89
- Laser/Scan Modes 90
- ³ 9 9 9 9 7 9 92
- ³ 1 1 7 0 1 0 92
- ³ 1 1 7 0 0 1 92
- ³ 1 1 7 0 1 1 92
- MS9524 and MS9544 93
- VoyagerPDF 93
- ³ 1 1 5 0 1 5 94
- ³ 1 1 5 0 1 3 94
- MS9535 VoyagerBT 95
- ³ 1 2 3 7 0 2 96
- ³ 1 2 3 7 1 2 96
- MS9535-5M VoyagerBT 97
- ³ 1 2 5 6 1 2 98
- ³ 1 2 3 9 1 5 98
- ³ 1 2 0 3 0 5 101
- ³ 8 4 6 6 0 1 1 0 101
- Operating Modes 103
- Activation Mode Features 104
- Continuous Blinky Mode 105
- Sleep Mode 105
- Miscellaneous Features 107
- Serial Program Mode 108
- Customer Support 109
- Product Service and Repair 110
Relacionado con productos y manuales para Lectores De Códigos De Barras Honeywell Scanner MS9520
(32 paginas)
(188 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.094 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales